Features
1. This device is an extremely simplified mold temperature controller integrating heating device, cooling device, medium circulation device and controller, with small volume and space-saving.
2. Due to the direct cooling method, it can handle the huge heat load generated by the mold.
3. High-pressure and large-flow oil pump is adopted to provide large flow to the small parts of the mold water channel, which can control the mold temperature evenly.
4. All pipelines and accessories are made of SUS304 stainless steel, and all inlets are sealed with high-temperature sealant, with good sealing performance and long service life.
5. The heat transfer medium of this model of temperature controller is oil, with a maximum control temperature of 200℃
6. The control part fully utilizes microcomputer and is equipped with the latest special controller with scheduled start, stop operation and alarm functions. The machine adopts PID control mode and contactless SSR solid state relay for heating power supply, which can realize high-precision temperature control with long service life, and the temperature setting and display values are digital. In addition, it is equipped with standard timer operation (99 hours 59 minutes). The substrate is equipped with remote control start/stop input contacts and comprehensive alarm output contacts.
7. The main power switch of this equipment has interlocking function, that is, when the temperature rise of the temperature controller is out of control and exceeds 220℃, the main switch will receive a signal and trip off automatically.
8. It has oil pipe rupture shutdown function, that is, when the oil pipe ruptures, the oil pump of the equipment stops running and the heater stops heating.
Alarm Protection Functions:
1. Phase reversal alarm.
2. Medium (water) shortage alarm.
3. Overload alarm.
4. Over-temperature alarm and power-off protection.
5. Low-temperature alarm.
6. Oil pipe rupture protection function
Technical Parameters
Model/Item | YK-HO200-6KW | YK-HO200-12KW | YK-HO200-24KW | |
Medium | Heat Transfer Oil | |||
Operating Temperature | 200℃ | |||
Overheat Prevention Activation Temperature | 220℃ | |||
Control Method (L) | PLC.PID Control | |||
Heating Tube Capacity (KW) (200v/380v/415v) | 6.0 | 12.0 | 24.0 | |
Pump | Motor Power (KW) | 0.5 | 0.75 | 2.2 |
Maximum Pressure (MPa) | 0.3 | 0.38 | 0.44 | |
Maximum Flow Rate (L/min) | 42 | 56 | 235 | |
Total Head (m) | 30 | 38 | 44 | |
Expansion Tank | Total Capacity (L) | 12 | 12 | 24 |
Heat Transfer Oil Consumption (L) | 14 | 14 | 28 | |
Cooling Method | Indirect Cooling | |||
Cooling Valve Flow Coefficient (CV Value) | 0.54 | 0.8 | 1 | |
Pipe Diameter | Cycling System | 3/8(10A)*2 Directions | 3/8(10A)*4 Directions | 3/8(10A)*8 Directions |
Cooling System | 15A | |||
Power Supply (Power Cord) | AC200V/60(50)Hz /380V/415V/50Hz 3P+E(5m) Can be customized according to the industrial voltage of the using area | |||
Total Electrical Capacity (KW) (200v/380v/415v) | 6.5 | 12.75 | 26.2 | |
Cooling Water Flow (L/Min) | ≥15 | ≥25 | ≥45 | |
Cooling Water Pressure (Mpa) | 0.1～0.3 14.63 22.05 24.35 27.08 39.6 | |||
Overall Dimensions L*W*H (mm) | 700*290*640 | 700*290*6400 | 790*360*850 | |
Weight (Kg) | 85 | 93 | 135 | |
The above are standard models, and various specifications can be customized according to customer requirements
