Main Features

1. Operating power supply voltage: 110VAC—240VAC, frequency 50HZ—60HZ

2. Control mode: manual control or automatic control

3. Control time segments: 4 segments (T1, T2, T3, T4). T1 is the first gate opening time, T2 is the first gate delayed opening time, T3 is the second gate opening time, T4 is the second gate delayed opening time.

4. Time adjustment range: 0—999.9S

5. Input signal: 220VAC, 110VAC, 24VDC (i.e., injection molding machine injection output) signal or switch signal can be selected. The signal wire has no positive/negative pole or neutral/live wire distinction and can be connected arbitrarily.

6. Output control voltage: 220VAC, 110VAC, 24VDC can be selected arbitrarily.

7. Output control: air valve

8. Working mode: A mode or B mode can be selected, B mode is commonly used and set as default from factory.

A mode: Starts working after receiving input signal; if the set time of t1,t2,t3,t4 is not completed, disconnecting the input signal will not stop the time controller, which will continue working until t1,t2,t3,t4 are completed;

B mode: Starts working after receiving input signal; when the input signal is disconnected, even if the set time of t1,t2,t3,t4 is not completed, the time controller will stop working.

Technical Parameter Table