200℃ Water Temperature Controller
Features
1. This device is an extremely simplified mold temperature controller integrating heating device, cooling device, medium circulation device and controller, with small volume and space-saving.
2. Due to the direct cooling method, it can handle the huge heat load generated by the mold.
3. High-pressure and large-flow water pump is adopted to ensure large flow in the small parts of the mold water channel, which can control the mold temperature uniformly.
4. All pipelines and accessories are made of SUS304 stainless steel, and all interfaces are sealed with high-temperature sealant, featuring good sealing performance and long service life.
5. The heat medium of this model of temperature controller is water, with a maximum control temperature of 200℃
6. The control part fully utilizes microcomputer and is equipped with the latest special controller with scheduled start, stop operation and alarm functions. The machine adopts PID control mode and contactless SSR solid state relay for heating power supply, which can realize high-precision temperature control and long service life, with digital temperature setting and display values. In addition, it is equipped with standard timer operation (99 hours 59 minutes). The substrate is equipped with remote control start/stop input contacts and comprehensive alarm output contacts.
7. The main power switch of this equipment has interlocking function, that is, when the temperature rise of the temperature controller is out of control and exceeds 210℃, the main switch will receive a signal and trip off automatically.
8. This equipment has high-pressure protection function to avoid explosion due to excessive internal air pressure.
Alarm Protection Functions:
1. Phase reversal alarm.
2. Medium (water) shortage alarm.
3. Overload alarm.
4. Over-temperature alarm and power-off protection.
5. Low-temperature alarm.
6. High-pressure protection function
Technical Parameters
Model Item | YK-HW180-12KW | YK-HW180-24KW | ||
Medium Operating Temperature |
Clean Water | |||
Maximum Temperature | 200℃ | |||
Control Method | PID Control | |||
Heating Tube | Capacity (kw) | 12 | 24 | |
Control Method | SSR Control | |||
Medium Pump | Sealing Method | Shaftless Seal | ||
Motor Power (HW/50Hz | 1.1 | 3 | ||
Maximum Pressure (MPa) | 0.57 | 0.78 | ||
Maximum Flow (L/min) | 55 | 128 | ||
Total Head (m) | 57 | 78 | ||
Booster Pump | Type | Magnetic Plunger Pump | ||
Motor Power (KW/50Hz) | 0.048 | |||
Maximum Pressure (MPa) | 1.5 | |||
Maximum Flow (L/min) | 0.65 | |||
Cooling Method | Direct Cooling | |||
Cooling Capacity (KW×）△t=30℃） | 7.3 | |||
Pipe Diameter | Circulation System | 3/8 (10A)×4 Circuits | 3/8 (10A)×4 Circuits | |
Cooling System | 1/2 inch (15A) | 3/4 inch (20A) | ||
Alarms | Phase Reversal, Medium Shortage, Water Pump Overload, Temperature Upper Limit, Overheat Prevention | |||
Utilities | Power Supply Voltage | AC 200V/60Hz 380V/50Hz 4150V/50Hz 3P+E(5m) Can be customized according to industrial power supply in the using area | ||
Main Circuit Breaker Capacity (380V220V) (A) | 20/32 | 32/40 | ||
Total Electrical Capacity (KW) (50Hz) | 7.05 | 10.05 | ||
Cooling Water Flow (L/min) | 15 | |||
Cooling Water Pressure (MPa) | 0.2-0.5 | |||
Overall Dimensions L×W×H | 630*250*720 | 790*320*850 | ||
Machine Weight (Kg) | 75 | 110 | ||
The above are standard models, and various specifications can be customized according to customer requirements
