180℃ 油温机
180℃ oil temperature machine
Characteristics
1、This device is a extremely simplified CTA integrated with heating unit, media circulating device and control panel, which reduces installation area and saves space.
2、It can handle a great heat load produced by mold due to adopting direct cooling way.
3、The adoption of water pump with high pressure and mass flow makes small part of mold waterway obtained a larger flow and can evenly control the temperature of mold.
4、All pipes and fittings are SUS304 stainless steel, and all interfaces are sealed by high temperature sealant of good sealing performance and long service life.
5、The thermal media of this mold temperature machine is water, and the maximum control temperature is 180℃.
6、The control part makes full use of the microcomputer, equipped with the latest special controller with the function of appointment start, stop operation and alarm.
The machine adopts PID control mode, non-contact SSR solid-state relay power supply heating is of high-precision temperature control and long service life, and the temperature setting and display value is digital. In addition, a standard timer runs (99.59 hours). Substrate is of remote control start and stop input contacts and integrated alarm output contacts.
7、The main power switch of this device has a linkage function, that is, when the temperature rise of the mold temperature controller exceeds 190℃, the main switch will receive a signal and the automatic trip will be disconnected.
8、This device has high voltage protection to prevent explosion due to high internal pressure.
Alarm protection function：
1、Reverse-phase alarm
2、Insufficient media(oil) alarm
3、Over-load alarm
4、Over-temperature alarm and power-off protection
5、Low temperature alarm
6、Rupture protection function of oil pipe
Technical parameter table
Type
Project
YK-HO180-6KW
YK-HO180-12KW
YK-HO180-24KW
Media
Hot media oil
Using temperature
180℃
Overheating preventing operating temperature
190℃
Controlling method（L）
PLC.PID Control
Heater capacity（KW）（200v/380v/415v）
6.0
12.0
24.0
Pump
Motor power（KW）
0.5
0.75
2.2
Maximum pressure（MPa）
0.3
0.38
0.44
Maximum flow（L/min）
42
56
235
Full field（m）
30
38
44
Inflated oil tank
Full capacity（L）
12
12
24
Using hot media oil capacity（L）
14
14
28
Cooling method
Direct cooling
Cooling valve flow coefficient（CV value）
0.54
0.8
1
Piping diameter
Circulatory system
3/8(10A)*2 direction
3/8(10A)*4 direction
3/8(10A)*8 direction
Cooling system
15A
Power supply
AC200V/60(50)Hz /380V/415V/50Hz 3P+E(5m) (can be ordered according to the industrial power supply in the area)
Total electrical capacity(KW)（200v/380v/415v）
6.5
12.75
26.2
Cooling water capacity（L/Min）
≥15
≥25
≥45
Cooling water pressure（Mpa）
0.1～0.3
14.63
22.05
24.35
27.08
39.6
Dimension
L*W*H（mm）
700*290*640
700*290*6400
790*360*850
Weight（Kg）
85
93
135
The above is a standing model, which can be ordered according to customers’ demand.
