2、Control mode：Manual control mode and automatic control mode can be selected.

  3、The control time period is 2 segments, that is, T1 and T2. T1 is gate opening time and T2 is gate opening delay time.

  4、Time adjustment range：0—999.9S

   Input signal：220VAC、110VAC、24VDC（Injection molding machine jetting output）or switch signal optional. The signal line is not connected to the positive pole or the zero line.

     5、Output control voltage：220VAC、110VAC、24VDC available

     6、Output control：YKT-Y-4(8) controls oil valve, select types according to demand for manufacturing

     7、Operating mode：A mode or B mode is available，B mode is used in common use, and the factory is set as B mode.

A mode: After receiving the input signal, it starts to work. If the time set by t1, t2 does not work, disconnecting the input signal and the time controller will continue to work until t1, t2 work is completed;

B mode: After receiving the input signal, it starts to work. When the input signal is disconnected, the time controller will stop working even if the time of T1 and T2 is not finished.

          Technical parameter table